// Please edit this file carefully, as incorrect values may cause issues with your device.

This guide provides a general outline for creating a scatter file for an MT6761 device. If you're unsure about specific values or encounter issues, consider seeking help from online forums or communities dedicated to your device or the SP Flash Tool.

A scatter file is a text file used in the SP Flash Tool to describe the layout of a smartphone's internal storage, including the locations of various partitions such as boot, recovery, system, and userdata. It's essential for flashing firmware, updating, or repairing a device.

- block_size: 0x200 - base: 0x11000000 - size: 0x01000000 - name: recovery - offset: 0x00220000 - size: 0x00500000

- block_size: 0x200 - base: 0x00000000 - size: 0x00000000 - name: preloader - offset: 0x00000000 - size: 0x00010000

You can use the following template as a starting point:

- block_size: 0x200 - base: 0x10000000 - size: 0x00500000 - name: bootloader - offset: 0x00020000 - size: 0x00020000

- block_size: 0x200 - base: 0x12000000 - size: 0x10000000 - name: system - offset: 0x00720000 - size: 0x04000000

Mt6761 Scatter File Top

// Please edit this file carefully, as incorrect values may cause issues with your device.

This guide provides a general outline for creating a scatter file for an MT6761 device. If you're unsure about specific values or encounter issues, consider seeking help from online forums or communities dedicated to your device or the SP Flash Tool.

A scatter file is a text file used in the SP Flash Tool to describe the layout of a smartphone's internal storage, including the locations of various partitions such as boot, recovery, system, and userdata. It's essential for flashing firmware, updating, or repairing a device.

- block_size: 0x200 - base: 0x11000000 - size: 0x01000000 - name: recovery - offset: 0x00220000 - size: 0x00500000

- block_size: 0x200 - base: 0x00000000 - size: 0x00000000 - name: preloader - offset: 0x00000000 - size: 0x00010000

You can use the following template as a starting point:

- block_size: 0x200 - base: 0x10000000 - size: 0x00500000 - name: bootloader - offset: 0x00020000 - size: 0x00020000

- block_size: 0x200 - base: 0x12000000 - size: 0x10000000 - name: system - offset: 0x00720000 - size: 0x04000000